Batteries for photovoltaics Dyness Tower Pro
Dyness Tower Pro is a high voltage battery range from Dyness. This category lists 7 Dyness Tower Pro products with a usable capacity of 3.65 to 21.89 kWh. Guide
Suitable for: Home battery storage.
Product sorting
List of products
Listing controls
Related storage categories
- Batteries for photovoltaics Dyness
- Batteries for photovoltaics Dyness STACK100
- Batteries for photovoltaics Dyness STACK280
- Batteries for photovoltaics Dyness Tower
- Batteries for photovoltaics high voltage
- Home battery storage
- Batteries for photovoltaics
Dyness Tower Pro at a glance
Dyness Tower Pro is aimed at family houses and small businesses: it stores the daytime solar surplus for the evening and the night. The battery management system talks to the inverter over RS485, CAN, RS232, so the inverter must list Dyness Tower Pro as an approved battery before you order. Protection ratings in this range: IP55. Units rated IP54 or higher can be mounted outdoors within the temperature limits in the datasheet. The range includes separate battery modules and control units, so a system can start at the minimum configuration and grow later within the stack limits that Dyness specifies.
Tip from practice
High voltage stacks are matched to the inverter by module count. Check the minimum and maximum number of modules your inverter model accepts before you fix the capacity, because that range decides which configurations will work.
How to choose a Dyness Tower Pro configuration
The table lists every Dyness Tower Pro product in this category with the key figures we hold for it. Choose in this order: inverter compatibility first, then usable capacity against evening and night consumption, then power and siting.
Show the full guide Close the guide
Dyness Tower Pro products compared
| Product | Usable capacity | Nominal voltage | Discharge power | Communication | IP rating |
|---|---|---|---|---|---|
| Dyness Tower Pro BDU + Floor mount | - | - | - | RS485, CAN, RS232 | IP55 |
| Dyness Tower Pro Battery Module 3.84 kWh | 3.65 kWh | 96 V | 3.84 kW | RS485, CAN, RS232 | IP55 |
| Dyness Tower Pro TP7 | 7.3 kWh | 192 V | 7.68 kW | RS485, CAN, RS232 | IP55 |
| Dyness Tower Pro TP11 | 10.94 kWh | 288 V | 11.52 kW | RS485, CAN, RS232 | IP55 |
| Dyness Tower Pro TP15 | 14.59 kWh | 384 V | 15.36 kW | RS485, CAN, RS232 | IP55 |
| Dyness Tower Pro TP19 | 18.24 kWh | 480 V | 19.2 kW | RS485, CAN, RS232 | IP55 |
| Dyness Tower Pro TP23 | 21.89 kWh | 576 V | 23.04 kW | RS485, CAN, RS232 | IP55 |
Swipe the table to the left
Frequently asked questions about Dyness Tower Pro
What usable capacity does Dyness Tower Pro offer?
The Dyness Tower Pro products listed here offer 3.65 to 21.89 kWh of usable capacity, and the modular design lets you add capacity later. Compare usable capacity rather than nominal capacity when you size the system.
Is Dyness Tower Pro a low voltage or a high voltage battery?
Dyness Tower Pro is a high voltage battery. It needs an inverter with a high voltage battery input and does not work on a 48 V input.
Which inverters work with Dyness Tower Pro?
Any inverter that lists Dyness Tower Pro on its approved battery list. The battery communicates over RS485, CAN, RS232. Matching the voltage is not enough on its own, because the inverter and the battery management system must use the same protocol and firmware.
Can a Dyness Tower Pro system be expanded later?
Yes. Additional modules can be added within the maximum stack size that Dyness allows. Keep new modules in the same product family and firmware generation, and expand while the existing pack is still relatively new.
Can Dyness Tower Pro be installed outdoors?
Units rated IP54 or higher can be installed outdoors within the temperature range in the datasheet. The ratings in this range are IP55.
What is Dyness Tower Pro used for?
Mainly for family houses and small businesses. It stores the daytime solar surplus for the evening and the night and, with a suitable hybrid inverter, can also supply backup circuits during a grid outage.
Where can I buy Dyness Tower Pro batteries?
ONSA Plus supplies Dyness Tower Pro to installers and resellers across Europe. This category lists 7 Dyness Tower Pro products with current prices and availability, and there is no minimum order.
Usable capacity, backup behaviour and inverter compatibility depend on the specific inverter model, the wiring of the installation and the manufacturer's approved combination list.
About ONSA Plus
Why installers across Europe buy storage from us
ONSA Plus is a European B2B distributor of photovoltaics, battery storage, heat pumps and EV charging stations. In our own EU warehouses we keep over 1,500 products from 25+ brands, including Huawei, Solis, SolaX and Dyness.
We are not just a trading company. We design and service energy systems ourselves, so we answer questions on battery sizing, inverter pairing and backup wiring from engineering practice, not from a catalogue. There is no minimum order, so you buy what the job needs.
